Armadale ferry terminal seen from the water

Scotland

Ferry to Armadale

2 ferry routes serve Armadale, operated by Red Funnel and Wightlink. Fares from £46.47.

  • 2 routes
  • 1 destinations
  • 2 operators

About Armadale ferry port

Armadale in Scotland is served by 2 ferry routes, operated by Red Funnel and Wightlink. From here you can sail to Mallaig.

The cheapest crossing from Armadale is currently Mallaig to Armadale, with fares from £46.47. Compare every departure below, then book in a couple of minutes.

Where can you sail to from Armadale?

Armadale connects to Mallaig.

Check-in and boarding at Armadale

Vehicle check-in normally opens two hours before departure and closes 45 to 60 minutes before sailing; foot passengers should allow 45 minutes. Have your booking reference, passports and, where relevant, pet documentation ready. See our full check-in and boarding guide.

Getting to the terminal

Follow signs for the ferry terminal rather than the town centre. Port approach roads are usually separate. Allow extra time on summer Fridays and Saturdays, when queues at Armadale build well before check-in opens.

Armadale ferry port: common questions

Where is Armadale ferry port?

Armadale ferry terminal is in Scotland and serves 2 ferry routes operated by Red Funnel and Wightlink.

Which ferries sail from Armadale?

From Armadale you can sail to Mallaig. Red Funnel and Wightlink operate these crossings.

What is the cheapest ferry from Armadale?

The lowest fares from Armadale are on the Mallaig to Armadale route, starting from £46.47 one way.

What time should I arrive at Armadale ferry port?

Arrive 90 minutes before departure if you are taking a vehicle, or 45 minutes as a foot passenger. Check-in typically closes 30 to 60 minutes before sailing, and first-time biometric border registration on international routes can add time.

Is there parking at Armadale?

Most ferry terminals offer both short-stay and long-stay parking. Pre-booking parking is usually cheaper than turning up, particularly in summer. Check the operator's terminal page for current rates.